H&H Asphalt Paving
Glen Mills, PA Asphalt Paving & Sealcoating
Driveways, parking lots & sealcoating — installed and maintained by a local crew
across northern Delaware & Southeastern Pennsylvania.
Local Paving
Paving in Glen Mills, PA
Glen Mills sits at the Route 1 and Route 202 interchange in Concord and Thornbury townships, an area that’s grown considerably as newer suburban development has filled in around the older corridor. Driveways here tend to be larger than what we see in tighter, older boroughs — reflecting bigger lots and more recent construction — which means more square footage to grade and pave correctly the first time.
Commercial growth along Route 1 has followed the residential expansion, with newer retail and business development needing durable, code-compliant lots built to handle steady traffic from the interchange. Near Chadds Ford, that same pattern holds — larger-lot residential paving set back from the highway, with commercial and retail work concentrated closer to Route 1 itself.
Our Process
How we pave a Glen Mills driveway or lot
Every job follows the same disciplined sequence — the base and drainage work you can’t see is what keeps the surface you can see from cracking, sinking, or holding water a few winters later.
- 1
Site inspection
We walk the site — a newer retail or business lot off the Route 1 and Route 202 interchange, or a large driveway on a recently built lot in Concord or Thornbury — and evaluate the existing surface, drainage, and how the traffic it will carry loads the new pavement.
- 2
Removal & prep
On a resurfacing job the old asphalt and any unstable base material are removed; on the first-time installs common in Glen Mills’ newer developments, we start from a freshly graded lot and get the prep right before a single truckload goes down.
- 3
Grading & drainage
The surface is graded to carry water away from the garage and foundation and out to the drainage the development is built around — the step that decides whether a big new driveway sheds water or pools it after the first heavy storm.
- 4
Stone base
A compacted stone base is installed or rebuilt. On the larger lots here there’s more square footage to build correctly, and getting the base and compaction right on day one is what keeps a new driveway from settling a year or two later.
- 5
Asphalt installation
Hot-mix asphalt is laid at a depth suited to the job — a heavier commercial-grade mix for the newer retail and business lots along Route 1, standard depth for the larger residential driveways set back toward Chadds Ford.
- 6
Rolling & compaction
Professional rollers compact the asphalt into a dense, even surface built to stand up to the steady interchange and commuter traffic Route 1 and Route 202 feed into the area.
- 7
Cleanup & finishing
We clean the site and handle finishing work; striping for retail and business lots is scheduled once the asphalt has cured enough to hold a line.
- 8
Aftercare
Most residential jobs take one to a few days, and we schedule commercial work around business hours. Keep vehicles off for at least 48 hours and follow the aftercare we provide.
Services
Our services in Glen Mills
Residential driveways
Hot-mix asphalt driveways, resurfacing, and repairs for Glen Mills homeowners — built for our region’s freeze-thaw cycles and graded to drain.
Commercial & parking lots
Parking-lot construction, line striping, and sealcoating for Glen Mills businesses, HOAs, and property managers — built for traffic and easy to maintain.
Repair, resurface, or replace
The right fix for your driveway
A lot of Glen Mills’ pavement is newer — larger driveways on recently built lots in Concord and Thornbury, and retail and business lots that followed the growth along Route 1 — so more often the question is protecting a fairly fresh surface than rebuilding a failed one. Either way the right fix comes down to the base underneath. Here’s how we tell the difference on a Glen Mills property, and what each path means for cost and how long it lasts.
Sealcoat & crack fill
The most common call on Glen Mills’ newer driveways: for a sound surface with minor wear, filling small cracks and sealing early keeps water and winter road salt out of the base before the freeze-thaw cycle can widen them — and protects a big, fairly new investment.
Resurface
When the surface is worn but the base is still solid, a new asphalt layer over a prepared surface restores it for far less than a full rebuild — the right middle ground for the older driveways mixed in among the area’s newer construction.
Replace
Alligator cracking, sinking, or standing water usually mean the base itself has failed — sometimes because a large driveway wasn’t compacted or graded correctly the first time. We remove and rebuild the base and drainage so the new surface actually lasts.
Maintenance
Keeping Glen Mills asphalt in shape year-round
Spring
Inspect for cracks, potholes, and standing water after a winter of plow scraping and road salt, and clear leaves and debris from drains and swales so runoff from a large lot or driveway has somewhere to go.
Summer
Warm, dry weather is ideal for crack filling and sealcoating — the main way to protect the newer driveways and business lots common around here before wear ever sets in. Sealing early keeps water out of the base.
Fall
Clear leaves and debris from driveway aprons and parking-lot drains, and repair open cracks before the freeze-and-thaw cycle and the first plow pass work them wider.
Winter
Plows and road salt are hard on asphalt edges. Use plastic snow shovels, not metal blades, and keep harsh deicers off the surface where you can — especially on the long, wide driveways typical of the area’s larger lots.
Why H&H
Local, licensed, and built on base work
H&H is owned by Henry, a third-generation paving contractor with over a decade in the trade, serving Glen Mills and the rest of Delaware County — including Concordville, Garnet Valley, Chadds Ford, and Chester Heights. Licensed and fully insured, our crew focuses on the base prep, grading, drainage, and compaction that decide whether a driveway or business lot holds up to the interchange traffic Route 1 and Route 202 carry and winter plowing — and we give straight answers on whether repair, resurfacing, or replacement is the best value for your property.
Reviews
What local customers say
“Great job, done in one day. Will have them back each year to coat the driveway.”
H&H customer
“We have a big driveway and a new garage and they had everything done in two days — and the best price ever. So pleased with the work and the professionalism.”
H&H customer
“My driveway was completely removed, widened, stone added, rolled and blacktopped. The crew was all business. It looks unbelievable — I’d recommend H&H to anyone.”
H&H customer
FAQ
Glen Mills asphalt paving questions
Will adding or widening a driveway in Concord Township trigger a stormwater review?
It can. Concord Township’s stormwater rules kick in once a project adds impervious surface past a set threshold, and adding paved area counts toward it — resurfacing an existing driveway keeps the same footprint and usually doesn’t. The township also expects residential driveways to be paved with an approved hard surface for the first stretch back from the street. Thresholds and specifics change, so we confirm the current rules and pull any permits before we start.
Do you handle new driveways in newer developments?
Yes — a lot of our Glen Mills work is first-time installs on freshly graded lots in Concord and Thornbury. On a big new driveway the base compaction and grading matter more than anything: get them right on day one and it sheds water and holds up; get them wrong and problems surface within a year or two.
My driveway connects to Route 1 or Route 202 — is a special permit needed?
Likely. Where a driveway or lot connects to a state-maintained road like Route 1 or Route 202, PennDOT issues the entrance permit (a Highway Occupancy Permit) and reviews sight distance and drainage. We handle that step; if your frontage is on a township road, the township reviews it instead.
Do I need HOA approval before repaving?
Often, in the planned communities around here. Many associations set standards for driveway work or shared roads, so if your property is in an HOA it’s worth confirming approval before we schedule — we’re happy to work within their requirements.
When is the best time of year to pave around Glen Mills?
Late spring through early fall. Warm, dry conditions let the asphalt compact and cure properly, which matters in our Mid-Atlantic climate where winter brings plow scraping and road salt.
How long does asphalt last with our winters?
With proper base preparation and regular sealcoating, an asphalt driveway or lot commonly lasts 15 to 20+ years, even with the freeze-thaw stress a full Mid-Atlantic winter puts on it — and sealing a newer driveway early is the best way to reach the top of that range.
Service Area
Where we pave near Glen Mills
Nearby
Nearby service areas
Ready when you are
Get your free paving estimate
Tell us about your driveway or lot and we’ll get you a fast, no-pressure quote.
Every area we serve